APP Sensor Inspection

NOTE:  Since there is no direct method to test the inspection item, the defective component judgement is based on the results from the other inspection items.

Test Procedure 

• Preparation
• • -

    APP sensor connector (6P): disconnected

• Procedure
• • -

    Perform the inspection according to the following table.

(Disconnected)APP sensor connector (6P)female terminals

IG Mode

Courtesy of HONDA, U.S.A., INC.

Normal Conditions

Unit output voltage inspection 

ON

About 5.0 V 

Results 

• If it is normal, there is a problem with the accelerator pedal module.
• If it is abnormal, there is a problem with other related components.