Cruise Control Recall Control Not Working
After having deactivated the Cruise Control system by pressing the brake/clutch pedal, when the Cruise Control "RESUME" button is pressed the speed set previously is not restored
| 1 | CHECK USING DIAGNOSIS EQUIPMENT | EVERYTHING OK | PROBLEMS ENCOUNTERED | OPERATION |
| Connect the diagnosis equipment to the engine management control unit. Check that the lever RECALL position is recognized. Check that the Cruise Control contacts are working properly in the RECALL position |
Go to Step 2 | No continuity for lever contacts | Replace the steering wheel interface lever with builtin Cruise Control | |
| 3 | CONNECTIONS CHECK | EVERYTHING OK | PROBLEMS ENCOUNTERED | OPERATION |
| Check the electrical continuity of the wiring between the cruise control system control and the engine control unit | Go to Step 3 | Connections not correct | Restore the correct connections | |
| 4 | CORRECT OPERATION CHECK | EVERYTHING OK | PROBLEMS ENCOUNTERED | OPERATION |
| Check that the fault is no longer present | End of diagnosis | The fault persists: engine management control unit defective | Replace the engine management control unit |