Removal And Installation - Bracket

REMOVAL 

1. Disconnect the negative battery terminal.
2. Remove the passenger side footrest. Refer to FOOT REST, FLOOR, FRONT, REMOVAL AND INSTALLATION .
3. Remove the main body computer/junction unit. Refer to MODULE, BODY CONTROL (BCM), REMOVAL AND INSTALLATION .
4. Release the dashboard/passenger compartment coupling from the mounting bracket
5. If present, position the anti-lift control unit to one side, removing it from the Velcro on the bracket.

   Courtesy of CHRYSLER GROUP, LLC

INSTALLATION 

1. Fit the Body Computer mounting bracket and tighten the fixing screws.
2. If present, position the anti-lift control unit, engaging it with the Velcro on the bracket.
3. Engage the dashboard/passenger compartment coupling with the bracket.
4. Install the main body computer/junction unit. Refer to MODULE, BODY CONTROL (BCM), REMOVAL AND INSTALLATION .
5. Install the passenger side footrest. Refer to FOOT REST, FLOOR, FRONT, REMOVAL AND INSTALLATION .
6. Connect the negative battery terminal.