Removal And Installation

REMOVAL 

1. Disconnect the negative battery terminal.
2. Remove the engine cover. Refer to COVER, ENGINE, REMOVAL AND INSTALLATION .
3. Remove the Powertrain Control Module. Refer to MODULE, POWERTRAIN CONTROL (PCM), REMOVAL AND INSTALLATION .
4. Remove the starter. Refer to STARTER, REMOVAL AND INSTALLATION .

   Courtesy of CHRYSLER GROUP, LLC

5. Disconnect the electrical connection for the engine rpm sensor.
6. Undo the fixing screw (2a) and remove the engine rpm sensor (2b).

INSTALLATION 

1. Place the engine rpm sensor in position and tighten the fixing screw.
2. Connect the electrical connection for the engine rpm sensor.
3. Install the starter. Refer to STARTER, REMOVAL AND INSTALLATION .
4. Install the Powertrain Control Module. Refer to MODULE, POWERTRAIN CONTROL (PCM), REMOVAL AND INSTALLATION .
5. Install the engine cover. Refer to COVER, ENGINE, REMOVAL AND INSTALLATION .
6. Connect the negative battery terminal.