Removal And Installation

REMOVAL 

1. Disconnect the negative battery terminal.
2. Remove the engine cover. Refer to COVER, ENGINE, REMOVAL AND INSTALLATION .

   Courtesy of CHRYSLER GROUP, LLC

3. Disconnect the electrical connection for the intake air pressure/temperature sensor.
4. Undo the screw (2a) and remove the intake air temperature/pressure sensor (2b).

INSTALLATION 

1. Place the aspirated air temperature/pressure sensor back in its housing and tighten the screw.
2. Connect the electrical connection for the intake air temperature/pressure sensor.
3. Install the engine cover. Refer to COVER, ENGINE, REMOVAL AND INSTALLATION .
4. Connect the negative battery terminal.