| Chassis Domain Control Module (CDCM) to Body Nuts |
5 |
- |
44 |
|
| Front Stabilizer Bar Bracket to Crossmember Bolt |
60 |
44 |
- |
|
| Hub and Bearing to Knuckle Bolts |
100 |
74 |
- |
|
| Lower Control Arm to Crossmember Bolt |
60 |
44 |
- |
|
| Lower Control Arm to Knuckle Nut |
71 |
52 |
- |
Do not reuse fastener. If removed, a new fastener must be installed and tightened to specifications. |
| Stabilizer Bar Link to Stabilizer Bar Nut |
100 |
74 |
- |
Do not reuse fastener. If removed, a new fastener must be installed and tightened to specifications. |
| Stabilizer Bar Link to Strut Nut |
100 |
74 |
- |
Do not reuse fastener. If removed, a new fastener must be installed and tightened to specifications. |
| Strut to Body Nuts |
26 |
19 |
- |
|
| Strut Assembly to Lower Control Arm Bolts |
60 Plus 135° |
44 Plus 135° |
- |
Do not reuse fastener. If removed, a new fastener must be installed and tightened to specifications. |
| Strut Rod to Strut Mount Nut |
50 |
37 |
- |
|
| Tension Strut to Knuckle Nut |
71 |
52 |
|
Do not reuse fastener. If removed, a new fastener must be installed and tightened to specifications. |
| Tension Strut to Crossmember Bolt |
51 Plus 120° |
38 Plus 120° |
|
Do not reuse fastener. If removed, a new fastener must be installed and tightened to specifications. |
| Upper Control Arm to Body |
28 |
21 |
- |
Do not reuse fastener. If removed, a new fastener must be installed and tightened to specifications. |
| Upper Control Arm to Knuckle |
48 |
35 |
- |
|