Removal And Installation: Right

REMOVAL 

1. Disconnect and isolate the negative battery cable.
2. Remove the air cleaner and ducts. Refer to AIR CLEANER, REMOVAL AND INSTALLATION .

   Courtesy of CHRYSLER GROUP, LLC

3. Remove the screw (1a) and remove the right air temperature/pressure sensor (1b) from the intake manifold.

   Courtesy of CHRYSLER GROUP, LLC

4. Disconnect the wire harness connection (1a) and remove the right air temperature/pressure sensor (1b) with the O-ring.

INSTALLATION 

1. Place the right air temperature/pressure detector back in its housing with new O-ring and securely tighten the screw.
2. Connect the wire harness connection for the right air temperature/pressure detector.
3. Install the air cleaner and ducts. Refer to AIR CLEANER, REMOVAL AND INSTALLATION .
4. Connect the negative battery cable.