10.1 Inch Screen: Removal
WARNING: This page is about a different car, the 2022 Chrysler Voyager and 2022 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
- With a suitable tool, remove the radio display trim bezel (1) and disconnect the wire harness connectors.
- Remove the Display Screen Module (DSM) mounting bracket fasteners (1).
- Remove the fastener (2) from the lower side of the DSM.
- Release the tabs (3) around the perimeter of the DSM (4). Remove the DSM and bracket from the display bezel (5).
- If necessary, remove the fasteners (1) and separate the DSM (3) from the DSM bracket (2).