Global Telematics Box Module: Removal
WARNING: This page is about a different car, the 2022 Chrysler Voyager and 2022 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
- Remove the Integrated Center Stack (ICS) from the instrument panel cover. Refer to
MODULE, INTEGRATED CENTER STACK (ICSM), REMOVAL AND INSTALLATION .
- Disconnect the instrument panel wire harness connector (5), USB connector (4) and antenna connectors (3) from the Global Telematics Box Module (TBM2) (2).
- Remove the screws from the TBM2 mounting bracket (1) that secure the TBM2 (2) to the bracket.
- Remove the TBM2 (2) from the vehicle.