Removal And Installation: Front: Installation
WARNING: This page is about a different car, the 2022 Chrysler Voyager and 2022 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Illustration shown with instrument panel removed from view for clarity.
- Position the HVAC module to the air inlet housing.
- Install and tighten the screws (1) that secure the HVAC module to the air inlet housing.
- Connect the wire harness connector (2) to the HVAC module.
- Install the passenger side knee blocker air bag. Refer to AIR BAG, KNEE BLOCKER, REMOVAL AND INSTALLATION
.
- Install the glove box trim panel and glove box and hush panel (1). Refer to GLOVE BOX, INSTRUMENT PANEL, REMOVAL AND INSTALLATION .
- Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
- Initiate the Actuator Calibration function using a scan tool. Refer to STANDARD PROCEDURE .