Diode Assembly
- Place ohmmeter on x100 scale. Connect ohmmeter leads across B+ terminal and each of the 3 stator terminals, in turn. Reverse leads. Ohmmeter should indicate continuity in one direction only.
- Connect ohmmeter leads across negative plate and each of the 3 stator terminals, in turn. See Fig 1 . Reverse leads. Ohmmeter should indicate continuity in one direction only.
- Connect ohmmeter leads across D+ terminal and each of the 3 stator terminals, in turn. Reverse leads. Ohmmeter should indicate continuity in one direction only. Replace diode assembly if defective.