Window Switches
Remove window switch to be tested and disconnect harness connector. Check continuity between switch terminals with switch in appropriate position. Refer to the POWER WINDOW SWITCH TEST . See Fig 1 . If continuity is not as specified, replace window switch.
POWER WINDOW SWITCH TEST
| Switch Position | Between Terminals No. | Specification |
|---|---|---|
| Up | 1 & 4 | Continuity |
| Neutral | 2 & 5 | Continuity |
| " | 1 & 3 | Continuity |
| " | 2 & 4 | No Continuity |
| " | 1 & 4 | No Continuity |
| Down | 2 & 4 | Continuity |