FixVault
Home › Audi › 1998 › A8 Base › Repair and Diagnosis (Single Page) › Body & Frame › Door Locks › Power Door Locks › Programming › Code Control Module (Scan Tool Function 07) › Coding Control Module

Coding Control Module

  1. Initiate central locking system On Board Diagnostic (OBD). See INITIATING CENTRAL LOCKING SYSTEM ON BOARD DIAGNOSTIC (OBD)  under RETRIEVING DIAGNOSTIC TROUBLE CODES.
  2. Press buttons 0 and 7 to select "Code Control Module" function 07 and press Q button to confirm input.
  3. Enter 5-digit code. Fill empty positions with "0" (example: 16140).
  4. Press Q button to confirm input.
  5. The code module identification with coding value just entered is displays. Press right arrow button.
    NOTE: In the function "Read Measuring Value Block, Display Group 004" the coding for the central locking system can be checked. See READ MEASURING VALUE BLOCK (SCAN TOOL FUNCTION 08)  under PROGRAMMING.
About FixVault