Function Mode 02: Retrieving DTC Memory
NOTE:
If "dEF" appears in odometer LCD, replace instrument cluster.
When RAPID DATA TRANSFER SELECT FUNCTION XX is displayed, press 02, then press "Q" key to confirm input. Display shows number of DTCs stored in memory. NO DTC RECOGNIZED will be displayed if no DTCs are stored in memory. If DTCs are stored in memory, they will start printing out in sequence. If printer was not turned on, press right arrow key to advance through list of DTCs. Record DTCs and go to appropriate diagnostic test. See DTC DEFINITIONS table. Press right arrow key to return to select function display.
DTC DEFINITIONS
| DTC | Description |
|---|---|
| 00562 | Oil Level Thermal Sensor |
| 00667 | Outside Temperature Sensor |
| 00668 | Terminal No. 30 Voltage Supply Low |
| 00771 | Fuel Level Sensor |
| 00779 | Outside Air Temperature Sensor |
| 01039 | Engine Coolant Temperature Sensor |
| 01300 | No Communication With Control Module For Navigation With CD Mechanism |
| 01304 | No Communication With Radio |
| 01311 | Data Bus Information |
| 01312 | Powertrain Data Bus Faulty |
| 01314 | No Communication With Engine Control Module |
| 01315 | No Communication With Transmission Control Module |
| 01320 | No Communication With Climatronic Control Module |
| 01336 | Comfort System Data Bus Faulty |
| 01402 | Navigation Data Wire Signal |
| 65535 | Control Module Inoperative |