FixVault
Home › Audi › 2002 › S4 Avant Quattro, Automatic › Repair and Diagnosis › Engine Performance › System › Engine Controls - Self-Diagnostics - 2.7L Turbo › Self-Diagnostic System › Generating Readiness Code › Readiness Code Test Procedure (Generic Scan Tool)

Readiness Code Test Procedure (Generic Scan Tool)

  1. Connect scan tool to DLC. DLC is located at left side of steering column. See Figure.
  2. Follow scan tool manufacturer's instructions and generate Readiness Code. See Figure. Readiness code should display 0 0 0 0 0 0 0 0. If readiness code does not display as specified, generate Readiness Code.
About FixVault