Intake Valves And Separating Valves, Mark 60EC, Basic Setting
It is possible to perform a basic setting to the intake valves only if the ABS control module was replaced.
Use vehicle diagnosis, testing and information system VAS 5051 B or VAS 5052.
NOTE:
Once the intake valve basic settings have been done, then a basic setting to the separating valves must be performed.
-- Connect the vehicle diagnosis, testing and information system VAS 5051 B or VAS 5052.
- Chassis
- Brake System
- 01- On Board Diagnostic (OBD) capable systems
- 03 ABS control module J104 MK 60EC
- 03 Functions ABS MK 60EC J104
- Intake valve basic setting
- Separating valve basic setting
Follow the instructions exactly.