ATEQ TPMS Reset Procedure
NOTE:
On Audi vehicles, the TPMS3 cannot be used to register the TPMS sensors, or reset the TPMS.
NOTE:
In order for the TPMS to work, the specified pressures (provided on tire pressure label) must be reprogrammed after every change in air pressure.
NOTE:
Whenever tire pressure is adjusted (i.e., when readjusting tire pressure for a load condition), or after every wheel change, the adjusted pressure has to be stored again.
NOTE:
The correct saving of the specified values is a basic requirement for accurate tire pressure monitoring.
- Adjust air pressure in all tires to specifications (provided on tire pressure label located inside fuel filler door or B pillar).
- Turn ignition ON.
- Push the CAR button. See Fig 1.
- On the Multimedia Interface (MMI) menu, select SYSTEMS -> TIRE PRESSURES MONITORING by turning the MMI Control Knob.
- Press the multimedia control button on the center console when in the TIRE PRESSURE MONITORING menu.
- The saving takes place while driving.