Engine Mount: Installing

• Tightening specifications, refer to SUBFRAME OVERVIEW .

Installation is in reverse order of removal, note the following:

-- Install the heat shield for the steering gear boot. Refer to STEERING GEAR OVERVIEW .

-- Install the power steering supply pipe. Refer to POWER STEERING PUMP, REMOVING AND INSTALLING .

-- Check the power steering hydraulic fluid level. Refer to POWER STEERING, CHECKING HYDRAULIC OIL LEVEL .

-- Install air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .

-- On a vehicle with air suspension, deactivate vehicle lift mode. Refer to VEHICLE LIFT MODE .