Measured Values Block 32, Reading
NOTE:
Applies to certain countries only. Refer to the Maintenance table.
-- Follow these steps in sequential order.
- Connect Vehicle Diagnosis Tester
- On Board Diagnostic
- Engine electronics
- Measured value blocks
- Select measured values block 32
- Display field 2 (4-cylinder engines)
- Display field 2 and 4 (V6 and V8 engines)
NOTE:
If the values deviate by > 15%, then the Fuel Injector Cleaner G17, refer to FUEL INJECTOR CLEANER G17 must be increased by a factor of 4.
WARNING:
If a deviation of > 15% is repeated, then a repair is necessary.