Level Control System Control Module: Removing
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2011 Audi A6, 2010 Audi A6, 2009 Audi A6, 2008 Audi A6, and 2007 Audi A6. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Vehicle Diagnosis, Testing and Information System VAS5051A
-- If control module is replaced, select "Replace" function for respective control module in "Guided Fault Finding ".
NOTE:
The level control system control module -J197- is installed on the bulkhead behind the glove compartment.
-- Remove the cover -A- from the lower glove compartment cover -B-.
NOTE:
The cover -A- is secured by 4 retainers in the lower glove compartment cover -B-. These retainer can be difficult to remove, therefore be careful not to damage them when removing the lower glove compartment cover -B-.
-- Remove bolts -1-.
-- Remove the control module -2- downward.
-- Release and remove the connectors -arrows- from the control module.
-- Remove control module -2-.