Section 27 (Maintenance Procedures)
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2006 Audi TT, 2005 Audi TT, 2004 Audi TT, 2003 Audi TT, and 2002 Audi TT. However, it is still accessible from the selected car via links, so may be relevant.
- 01 Maintenance
- Servicing
- 30-day Inventory Maintenance
- Pre-Delivery Inspection Procedure
- Oil Change and Maintenance Service
- Emission Control Maintenance Schedule / Vehicle Maintenance Schedule
- Description of work
- Lights, electrical equipment, switches, displays and other driver-operated controls, testing operation
- Windshield wiper/washer system and headlight washer system, checking operation and adjusting washer jet settings
- Headlight washer system, checking washer jet settings
- Windshield washer/headlight washer system, topping off fluid
- Wiper blades, checking park position and checking for damage
- Wiper blade contact angle, adjusting
- Electric window lifters, checking positions
- Clock, setting correct time
- Air conditioner, checking operation and setting temperature to 72 ° F (22 ° C)
- Radio, activating anti-theft coding by entering fixed code number
- On Board Diagnostic (OBD), checking DTC memory with VAS 5051 or VAG 1551 scan tool
- Instrument cluster, setting language version
- Service interval display, resetting
- Door arresters and lock cylinders, lubricating
- Battery, checking electrolyte level and topping off with distilled water if necessary
- Battery, checking "no load" voltage before first engine start
- Battery, checking battery cables for secure fit (only applies to vehicles kept in stock for long periods)
- Engine cover, removing
- Engine and engine compartment, visual check for leaks and damage (from above and below)
- Engine coolant system, checking antifreeze and topping off with coolant if necessary
- Air cleaner, cleaning housing and replacing filter element
- Spark plugs, replacing
- Hydraulic system, checking for leaks, checking fluid level and if necessary topping off hydraulic fluid
- Dust and pollen filter element, replacing
- Transport locking elements, removing from front suspension struts
- Noise insulation, removing
- Manual transmission/final drive, checking oil level and topping off if necessary
- Automatic transmission/final drive, checking oil level and topping off if necessary
- Haldex clutch oil, checking level / changing / changing filter
- Engine oil, draining or extracting, and oil filter, changing
- Brake system, visually checking for leaks and damage
- Brake pads, checking thickness
- Under coating, visually checking for damage
- Tie rod ends, checking play, attachment and protective boots
- Tires (including spare), checking condition and wear pattern
- Tires (including spare), checking and recording tread depths
- Tires (including spare), inflating to correct pressures
- Wheel bolts, tightening to specified torque
- Engine oil, filling up
- Engine oil, checking oil level
- Brake fluid level (depending upon brake pad wear), checking
- Brake fluid, changing
- Headlights, aiming using Hella Universal Beamsetter IV
- Headlights (halogen), adjusting
- Headlights (gas charged Xenon), adjusting
- Road test
- RAPGARD ® , inspection, removal and disposal
- New Protective Vehicle Transit Coating, Liquid Film, inspection, removal and disposal
- Transportation wiper blades, removing at vehicle delivery
- Type plate and vehicle identification number
- Vehicle, lifting
- Tow-starting/towing
- Exhaust emission test