FixVault
Home › Audi › 2013 › A4 Base › Repair and Diagnosis › External Pages › Different car › Section 105 (Anti-Theft System - Security And Locks) › Keyless Entry Control Module › Removal

Keyless Entry Control Module: Removal

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from battery.
  2. Remove the left rear quarter trim. < Ref. to REMOVAL , Rear Quarter Trim . >
  3. Disconnect the keyless entry control module harness connector.
  4. Remove the bolt and then remove the keyless entry control module.
    Fig 1: Bolt And Keyless Entry Control Module
    G07666542Courtesy of SUBARU OF AMERICA, INC.
About FixVault