MECHATRONIC, Removing And Installing: Installing

Install in reverse order of removal. Note the following:

CAUTION:

There is a risk of destroying the transmission control module (Mechatronic) with static discharge.

Always "discharge" the static electricity before working with electric connectors. Do this by touching a grounded object, for example vehicle ground, the vehicle or the hoist.
Do not touch contacts in transmission connector with hands.

-- Make sure the connector is correctly connected to the Mechatronic.

-- Install the ATF filter housing, refer to Installing .

-- Install the ATF pan, refer to Installing .

-- Fill the ATF, refer to ATF Level, Checking .

After replacing the S tronic Transmission Mechatronic -J743-, the corresponding "Guided Functions" must be performed with the Vehicle Diagnostic Tester, refer to TRANSMISSION GUIDED FUNCTIONS .