FixVault

Overview - Rear Side Window

Fig 1: Overview Of Rear Side Window
GWWA64-10418Courtesy of AUDI OF AMERICA, LLC
  1. Side Window
    • The roof trim molding is removed. Refer to ROOF TRIM MOLDING, REMOVING AND INSTALLING .
    • Remove the door seal on the >>C-Pillar<< in the side window area.
    • Remove the window. Refer to REAR SIDE WINDOW, REMOVING AND INSTALLING .
    • When installing a new window, first press it into the >>D-pillar<< with the securing pin and then insert the whole thing into the window opening and let the securing pin lock into the >>C-pillar<<.
    • If a window was removed and is being installed again, then secure the window to the inside the window opening with tape.
  2. Adhesive Bead
    • Dimension -a- = 26 mm
  3. Securing Pin
    • No replacement part
    • Is cut through when removing window.
  4. Side Window Trim Molding
  5. Door Seal
    • Remove near the side window
  6. Roof Trim Molding