Calibration ToolVAS6350 WITH Peripheral Camera Calibration Device VAS6350/6, INSTALLING AND ALIGNING: Notes

WARNING: This page is about a different car, the 2015 Audi A7 Quattro and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

After performing service work on the vehicle, it may be necessary to calibrate the peripheral camera system. In detail, this is the case after:

Replacing one or more cameras
Replace Peripheral Camera Control Module -J928- (all cameras need to be calibrated)
Repair work on components in which a camera is installed or that influence the component location of the camera
After suspension adjustments
When adjusting the overlap range of the individual cameras

All cameras must be calibrated if the Peripheral Camera Control Module -J928- is replaced.