Instrument Cluster Multi-Pin Connector Contact Assignment
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi S8, 2018 Audi A8 Quattro, 2017 Audi S8, 2017 Audi A8 Quattro, and 2016 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.
Gray 32-pin connector -A-
- Diagnostics for Data Bus On Board Diagnostic Interface -J533-
- CAN Bus Shield
- CAN Bus Instrument Cluster High
- CAN Bus instrument cluster Low
- Sensor Ground for All Fuel Level Sensors
- Fuel Level Sensor -G-
- Fuel Level Sensor -G-
- Instrument Cluster Operation Button -E493-
- Fuel Level Sensor 2 -G169-
- Fuel Level Sensor 2 -G169-
- Fuel Level Sensor 3 -G237-
- Fuel Level Sensor 3 -G237-
- Not Assigned
- Not Assigned
- Not Assigned
- Not Assigned
- Analog Clock -Y-
- Video Shield - Preparation Work
- Night Vision System Control Module -J853- "-"
- Night Vision System Control Module -J853- "+"
- Video Shield - Preparation Work
- Not Assigned
- Radio Frequency Controlled Clock 5 V - Preparation Work
- Radio Frequency Controlled Clock Signal - Preparation Work
- Not Assigned
- Not Assigned
- Not Assigned
- Not Assigned
- Terminal 31
- Terminal 31
- Terminal 30
- Terminal 30
Optical MOST-Bus connection (fiber optic) -B-
- MOST bus input
- MOST bus output