Image Processing Control Module - J851-, Removing And Installing: Removing
The Image Processing Control Module - J851- is located in the front passenger seat footwell.
- Remove the front sill panel. Refer to Vehicle Interior Trim Panels Removing and Installing
- Remove the floor mat. -->
- Remove the footrest. Refer to Vehicle Interior Trim Panels, Footrest, Removing and Installing.
- Loosen the front passenger seat and push rearward with the wires still attached. Refer Front Seat, Removing and Installing.
- Disengage the carpet and push aside.
- Remove the nuts -arrows-.
- Remove the bolts -1 to 4- and remove the bracket -5- from the image processing control module.
- Disconnect the connector -2- and antenna wire -1-.
- Remove the image processing control module -3- from the front passenger footwell.