Striker Pin, Adjusting
Procedure
NOTE:
The striker pin backing must be position with the pins -arrows- exactly in the hole.
The striker pins must be sheared off cleanly after sliding the striker pin.
-- Loosen the bolts -2-.
-- Slide the striker pin -1- until the door is flush with the body contours.
NOTE:
When adjusting the striker pin, move it only toward the center of the vehicle.
Do not adjust the door height using the striker pin because the door lock will be damaged.
-- Loosen the bolts -2-.
-- Slide the striker pin -1- until the door is flush with the body contours.
-- Striker pin must align in door lock center for correct adjustment.
-- Tighten the bolts -2-.