Guidelines For Clean Working Conditions
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi S3, 2017 Audi A3 Quattro, 2017 Audi A3, 2016 Audi S3, and 2016 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Even small pieces of debris can cause faults. That is why the following guidelines for clean working conditions must be ensured with all procedures:
- Clean the connection points and the area around them prior to loosening.
- Clean with lint-free cloths.
- Immediately seal off any open lines and connections with clean plugs, for example, taken from the Engine Bung Set -VAS 6122-.
- Refrigerant circuit components must immediately be sealed with plugs taken from the Engine Bung Set -VAS 6122- after opening.
- Place removed parts on a clean surface and cover them with lint-free cloths.
- Carefully cover or seal opened components if repairs are not performed immediately.
- Immediately remove leaking liquids and clean the affected areas.
- Only install clean parts: remove the replacement parts from their packaging just before installing them. Do not use components which were stored without packaging.
- Protect the disconnected electrical or optical connectors from dirt and moisture and only connect when they are dry.