Service Interval Display, Resetting Service Event

CAUTION:

Risk of injury due to unintended engine start on high-voltage vehicles!

Pay attention to the high-voltage system warning messages:
For procedures where the ignition must be switched off, refer to HIGH VOLTAGE VEHICLES SAFETY PRECAUTIONS .

Procedure:

-- Connect the Vehicle Diagnostic Tester. Refer to VEHICLE DIAGNOSTIC TESTER, CONNECTING .

-- Select the Diagnostic mode and start the diagnosis.

-- Perform the vehicle identification.

-- Deselect "Working with Guided Fault Finding" by removing v and pressing Accept .

-- Switch to the "Special functions" tab.

-- Reset the service event through ODIS (select the respective service event).

-- Start the program using Perform test... .

-- Continue the program sequence.