Overview - Windshield Projection (Head-Up Display): Notes

Fig 1: Exploded View Of Windshield Projection (Head-Up Display)

Courtesy of AUDI OF AMERICA, LLC

1. Nut
   • 8 Nm
   • Quantity: 3
2. Expanding Rivet
   • For air duct
3. Exterior Bracket
   • For windshield projection control module
   • Removing and installing. Refer to OUTER BRACKET, REMOVING AND INSTALLING .
4. Bolt
   • Replace after removing.
   • Tightening sequence. Refer to WINDSHIELD PROJECTION HEAD UP DISPLAY CONTROL MODULE - TIGHTENING SPECIFICATION AND SEQUENCE .
   • Quantity: 2
5. Instrument Panel
6. Bolt
   • 1 Nm
   • Quantity: 5
7. Upper Cover
   • Removing and installing. Refer to WINDSHIELD PROJECTION HEAD UP DISPLAY CONTROL MODULE, REMOVING AND INSTALLING .
8. Frame
   • For upper cover
9. Air Duct
   • For windshield projection control module
10. Expanding Rivet
    • For air duct
11. Bolt
    • Tightening specifications and sequence. Refer to WINDSHIELD PROJECTION HEAD UP DISPLAY CONTROL MODULE - TIGHTENING SPECIFICATION AND SEQUENCE .
12. Windshield Projection Head Up Display Control Module -J898-
    • Removing and installing. Refer to WINDSHIELD PROJECTION HEAD UP DISPLAY CONTROL MODULE, REMOVING AND INSTALLING .
    • Calibrating. Refer to WINDSHIELD PROJECTION HEAD UP DISPLAY CONTROL MODULE, CALIBRATING .
13. Bolt
    • Replace after removing.
    • Tightening specifications and sequence. Refer to WINDSHIELD PROJECTION HEAD UP DISPLAY CONTROL MODULE - TIGHTENING SPECIFICATION AND SEQUENCE .
    • Quantity: 2
14. Interior Bracket
    • For windshield projection control module
    • Removing and installing. Refer to INNER BRACKET, REMOVING AND INSTALLING .
15. Central Tube
16. Nut
    • 8 Nm
    • Quantity: 3