Camshaft Position Sensor, Removing And Installing: Installing

Install in reverse order of removal and note the following:

• Replace the O-ring after removing.

-- Install the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

After removing or replacing the camshaft position sensor the adaptation values for the chain length must be adapted again.

-- Connect the Vehicle Diagnostic Tester.

-- Select Diagnostic  operating mode and Start diagnostics  .

-- Select the Select individual test  tab and select the following tree structure consecutively:

• Drivetrain 
• Select the engine code and engine 
• 01- OBD-capable systems  .
• 01 - Engine Electronics 
• 01 - Engine electronics, functions 
• 01 - Chain length diagnostic adaptation