Window Guide, Removing And Installing: Installing

WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

-- Install the window guide -A- on the door flange in the sequence -1 through 5-.

Courtesy of AUDI OF AMERICA, LLC

Step
1.	-- Position the upper edge of the window guide on the B-pillar door flange and push it forward in the direction of travel.
	The alignment pin -B- must engage in the window guide mount.
2.	-- Install the window guide on the door flange.
3.	-- Align the window guide on the A-pillar guide rail.
4.	-- Insert the seal -C- into the guide rail.
5.	-- Install the B-pillar trim (refer to B-PILLAR DOOR TRIM, REMOVING AND INSTALLING, FRONT ) and insert the seal -D- into the guide rail.

Install in reverse order of removal and note the following:

-- When inserting the guide rail must engage in the mount -2- -arrow-.