Overview - Ignition System
- Knock Sensor
- Cylinder Bank 1 (Right)
- Front Knock Sensor 1 -G61-
- Rear Knock Sensor 2 -G66-
- Removing and installing. Refer to KNOCK SENSOR, REMOVING AND INSTALLING .
- Bolt
- 20 Nm
- Tightening specifications affect the function of the knock sensor
- O-ring
- Always replace
- Camshaft Position Sensor
- Intake side: Camshaft Position Sensor -G40-
- Removing and installing. Refer to Camshaft Position Sensor -G40-, REMOVING AND INSTALLING, CYLINDER BANK 1 (RIGHT) .
- Exhaust side Camshaft Position Sensor 3 -G300-
- Removing and installing. Refer to Camshaft Position Sensor 3 -G300-, REMOVING AND INSTALLING, CYLINDER BANK 1 (RIGHT) .
- Bolt
- 9 Nm
- Spark Plug
- Tightening specification. Refer to appropriate service information.
- Replacement interval. Refer to Maintenance Tables.
- Ignition Coil
- Removing and installing. Refer to IGNITION COILS WITH POWER OUTPUT STAGES, REMOVING AND INSTALLING .
- Bolt
- 9 Nm
- Cable Guide
- Bolt
- 5 Nm
- Engine Speed Sensor -G28-
- Removing and installing. Refer to Engine Speed Sensor -G28-, REMOVING AND INSTALLING .
- Bolt
- 9 Nm
- Bolt
- 9 Nm
- Camshaft Position Sensor
- Intake side Camshaft Position Sensor 2 -G163-
- Removing and installing. Refer to CAMSHAFT POSITION SENSOR 2 -G163- /CAMSHAFT POSITION SENSOR 4 -G301-, REMOVING AND INSTALLING, CYLINDER BANK 2 (LEFT) .
- Exhaust side: Camshaft Position Sensor 4 -G301-
- Removing and installing. Refer to CAMSHAFT POSITION SENSOR 2 -G163- /CAMSHAFT POSITION SENSOR 4 -G301-, REMOVING AND INSTALLING, CYLINDER BANK 2 (LEFT) .
- O-ring
- Always replace
- Bolt
- 20 Nm
- Tightening specifications affect the function of the knock sensor
- Knock Sensor
- Cylinder Bank 2 (Left):
- Front Knock Sensor 3 -G198-
- Rear Knock Sensor 4 -G199-
- Removing and installing. Refer to KNOCK SENSOR, REMOVING AND INSTALLING .