Rear Window, Installing: Procedure

-- Prepare the new window glass for installation. Refer to ADJUSTMENT DIMENSIONS .

-- Prepare the undamaged window glass for installing. Refer to UNDAMAGED WINDOW GLASS, PREPARING FOR INSTALLATION .

-- Prepare the body flange for installation. Refer to BODY FLANGE, PREPARING FOR INSTALLATION .

-- Insert the rear window into the window opening using suction lifters.

-- Center the window glass at the sides.

• Observe minimum curing times. Refer to MINIMUM CURING TIMES FOR BONDED WINDOWS .

Further installation is performed in reverse order of removal, while noting the following:

TIP:

After connecting the wires or antenna wires, there may be additional wires for other optional equipment. Cut off these unnecessary wire ends at their connection base.