Bevel Box, Tightening Specification

Bevel Box on Dual-Clutch Transmission - Tightening Specification 

• Replace the bolts after removing them.

-- Tighten the bolts in steps as follows:

Step	Bolts	Tightening Specification/Additional Turn
1.	-Arrows-	Install all the way by hand
2.	-Arrows-	40 Nm diagonally
3.	-Arrows-	90° additional turn, diagonally

Bracket Version 1 for Bevel Box - Tightening Specification and Sequence 

-- Tighten the bolts in steps as follows:

Step	Bolts	Tightening Specification
1.	-A and B-	Install all the way by hand
2.	-A-	8 Nm
3.	-B-	8 Nm
4.	-A-	40 Nm
5.	-B-	40 Nm

Bracket Version 2 for Bevel Box - Tightening Specification and Sequence 

-- Tighten the bolts in steps as follows:

Step	Bolts	Tightening Specification
1.	-1-	Install all the way by hand
2.	-2-	40 Nm
3.	-1-	40 Nm

Additional Tightening Specifications 

• Refer to OVERVIEW - EMISSIONS CONTROL SYSTEM .