Emergency Battery, Reading Condition

Procedure: 

-- Connect the Vehicle Diagnostic Tester. Refer to VEHICLE DIAGNOSTIC TESTER, CONNECTING .

-- Select Diagnostic  mode and start the diagnosis.

-- Perform the vehicle identification.

-- Set v  and press Accept  to select "Work with Guided Fault Finding".

-- Switch to the "Special Functions" tab and select the following program:

• Battery level

-- Start the program using Perform test...  .

-- Continue the program sequence.

-- The following actions are derived from the test result:

Vehicle Diagnostic Tester result:	Action:
"Battery OK"	No further action is necessary.
"Battery critical"	Replace the battery. Refer to Control Modules .
"Faulty"	Replace the battery. Refer to Control Modules .