Bevel Box, Tightening Specification
Bevel Box on Dual-Clutch Transmission - Tightening Specification
- Replace the bolts after removing them.
-- Tighten the bolts in steps as follows:
| Step | Bolts | Tightening Specification/Additional Turn |
|---|---|---|
| 1. | -arrows- | Install all the way by hand |
| 2. | -arrows- | 40 Nm diagonally |
| 3. | -arrows- | 90° additional turn, diagonally |
Bevel Box to Transmission - Tightening Specification
-- Tighten the bolts in steps as follows:
| Step | Bolts | Tightening Specifications |
|---|---|---|
| 1. | -1 and 2- | Install all the way by hand |
| 2. | -2- | 40 Nm |
| 3. | -1- | 40 Nm |