Engine, Supporting In Installation Position

Special tools and workshop equipment required 

• Engine Support Bridge: 10-222A 
• Engine Support Bridge - Spindle: 10-222A/11 
• Engine Support - Supplement Kit: T40093A 

Procedure 

-- Install the engine cover and heat shield. Refer to ENGINE COVER, REMOVING AND INSTALLING .

-- Place the : 10-222A  on the left and right side of the longitudinal member.

Courtesy of AUDI OF AMERICA, LLC

-- Engage the : 10-222A/11  at the left and right on the engine lifting eyes.

-- Tension the engine with the spindles slightly until the engine mount is not under a load.

Assembling 

Assemble in the reverse order of removal. Note the following:

-- Install the heat shield and engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .