Instrument Cluster, Coding
Special tools and workshop equipment required
- Fault Read Out Device: VAG1551
NOTE:
Perform the following steps only after cluster replacement, or if the code is not as specified below
Indicated on display
| Rapid data transfer HELP Select function XX |
-- Press button 0 and 7 "Code Control Module" function 07.
Indicated on display
| Rapid data transfer Q 07 - Code Control Module |
-- Press Q button to confirm input.
Indicated on display
| Control module code Enter code number XXXXX (0-32000) |
-- Input code number from code chart table below.
| 00 | Irrelevant field | ||||
| 2 3 | USA Canada | ||||
| 6 | 6-cylinder engine | ||||
| 2 | Gasoline engine |
Indicated on display
| Control module code Q Enter code number 00262 (0-32000) |
-- Press Q button to confirm input.
Indicated on display
| 4D0 919 033 C4 Instrument Cluster D03 → Coding 00262 WSC 06812 |
-- Press → button to end coding.
Indicated on display
| Rapid data transfer HELP Select function XX |
-- Press button 0 and 6 to select "End Output" function 06.
Indicated on display
| Rapid data transfer Q 06 - End Output |
-- Press Q button to confirm input.
Indicated on display
| Rapid data transfer HELP Select function XX |