ABS Control Module -J104- /ABS Hydraulic Unit -N55-, REMOVING AND INSTALLING: Notes
Special tools and workshop equipment required
- Torque Wrench, 6-50Nm: VAG1331A
- Open Ring Spanner Insert - AF 11mm: VAG1410/6
- Torque Wrench - Universal Joint : VAG1410/7
- Mini Torque Wrench: VAS6854
- Brake Pedal Actuator: VAG1869/2 .
- Bleeder bottle from the Brake Charger/Bleeder Unit: VAS5234
- Safety Gloves
- Vehicle Diagnostic Tester
Plugs assembly part 5Q0 698 311
1 - M10 Plug
2 - M12 Plug
NOTE:
If the ABS Control Module -J104- is faulty, it can be replaced separately.
If the ABS Hydraulic Unit -N55- is faulty, it must be replaced together with the ABS Control Module -J104-.