Overview - Driver Assistance Systems Control Module

WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Driver Assistance Systems Control Module

Courtesy of AUDI

Bracket
- There are different versions. Refer to the appropriate Electronic Parts Information.
- For the Driver Assistance Systems Control Module -J1121-
- Removing and Installing. Refer to Driver Assistance Systems Control Module -J1121-, REMOVING AND INSTALLING .
Bolt
- 8 Nm
- Quantity: 2
Impact Guard
- Removing and Installing. Refer to Driver Assistance Systems Control Module -J1121-, REMOVING AND INSTALLING .
Bolt
- 8 Nm
  - Control module "Low" : quantity: 2
  - Control module "High" : quantity: 3
Clip
- Attaching the impact guard to bracket
Bolt
- 4.5 Nm
- For impact guard
- Quantity: 3
Bolt
- 8 Nm
- Only on control module "Low"
Bolt
- 8 Nm
- Only on control module "High"
Bolt
- 4.5 Nm
- For bracket
- Quantity: 3
Driver Assistance Systems Control Module -J1121-
- There are different versions. Refer to the appropriate Electronic Parts Information.
- Removing and Installing. Refer to Driver Assistance Systems Control Module -J1121-, REMOVING AND INSTALLING .
Connector
Connectors
- Allocation