Overview - Windshield Projection (Head-Up Display)
WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
The overview shows a LHD vehicle as an example. For RHD vehicles the layout is a mirror image.
- Instrument Panel Crossmember
- Nut
- Quantity: 3
- 8 Nm
- Exterior Bracket
- For windshield projection control module
- Removing and installing. Refer to WINDSHIELD PROJECTION HEAD UP DISPLAY CONTROL MODULE, REMOVING AND INSTALLING .
- Bolt
- Quantity: 2
- Tightening specification and sequence. Refer to Fig 2.
- Instrument Panel
- Upper Cover
- Removing and Installing. Refer to OVERVIEW - INSTRUMENT PANEL
- Windshield Projection Head Up Display Control Module -J898-
- Removing and installing. Refer to WINDSHIELD PROJECTION HEAD UP DISPLAY CONTROL MODULE, REMOVING AND INSTALLING .
- Bolt
- Tightening specification and sequence. Refer to Fig 2.
- Bolt
- Quantity: 2
- Tightening specification and sequence. Refer to Fig 2.
- Interior Bracket
- For windshield projection control module
- Removing and installing. Refer to WINDSHIELD PROJECTION HEAD UP DISPLAY CONTROL MODULE, REMOVING AND INSTALLING .
- Nut
- Quantity: 3
- 8 Nm
Windshield Projection Head Up Display Control Module - Tightening Specification and Sequence
-- Tighten the bolts in the sequence shown.
| Bolts | Tightening Specification |
|---|---|
| -1- | 5.5 Nm |
| -2 and 3- | 4 Nm |