Axle Alignment Specified Values, Multi-Link Rear Axle
- The specified adjustment values correspond to the curb weight position. Refer to Dimension Overview . To determine the curb weight position, the dimension -a- between the center of the wheel and the lower edge of the fender/wheel housing must be determined.
- Specified values valid for all engine versions.
- Production Control Number (PR number) explanation. Refer to PRODUCTION CONTROL NUMBER (PR NUMBER) EXPLANATIONS .
| Multi-Link Suspension | A3 Standard Suspension 1JA/G01 | A3 with High-Voltage System Standard Suspension 1JA/G11 | A3 Sport Suspension 1JC/G02/G12 | |
|---|---|---|---|---|
| Camber | - 1° 20' ± 30' | -1° 45' ± 30' | - 1° 20' ± 30' | |
| Maximum permissible difference between both sides | 30' | 30' | 30' | |
| Total toe, wheels not pressed | 26' ± 12' | 16' ± 10' | 26' ± 12' | |
| Maximum permissible deviation in direction of travel relative to vehicle longitudinal axis | 12' | 12' | 12' | |
| Multi-Link Suspension | A3 Suspension with Electronic Damping 1JP/G04 | A3 Heavy Duty Suspension UC7/G03 | S3 Suspension 1JE/G05 | |
|---|---|---|---|---|
| Camber | - 1° 20' ± 30' | - 1° 20' ± 30' | - 1° 20' ± 30' | |
| Maximum permissible difference between both sides | 30' | 30' | 30' | |
| Total toe, wheels not pressed | 26' ± 12' | 26' ± 12' | 14' ± 10' | |
| Maximum permissible deviation in direction of travel relative to vehicle longitudinal axis | 12' | 12' | 12' | |
| Multi-Link Suspension | S3 Suspension with Electronic Damping UB1/G06 | RS3 Suspension 1JR/G15 | RS3 Suspension with Electronic Damping UB9/G14 | |
|---|---|---|---|---|
| Camber | - 1° 20' ± 30' | -1° 45' ± 30' | -1° 45' ± 30' | |
| Maximum permissible difference between both sides | 30' | 30' | 30' | |
| Total toe, wheels not pressed | 14' ± 10' | 14' ± 10' | 14' ± 10' | |
| Maximum permissible deviation in direction of travel relative to vehicle longitudinal axis | 12' | 12' | 12' | |