Infotainment System Display, Removing And Installing: Notes
WARNING: This page is about a different car, the 2024 Audi Q3 and 2023 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.
The Front Information Display Control Head -J685- is located in the center of the instrument panel.
If the Front Information Display Control Head -J685- is being replaced, the following procedure applies:
-- Connecting and switching on the Vehicle Diagnostic Tester.
-- Switch the ignition on.
-- Select and start the Diagnostic operating mode.
-- Select the Test plan tab.
-- Select the Select individual test button and select the following tree structure consecutively:
- Diagnostic-capable systems
- 005F - Information Electronics Control Module 1 - J794 (MIB 2+) or 005F - Information Electronics Control Module 1 - J794 (MIB 3)
- 005F - Information Electronics Control Module 1, functions
- 0636 - Front Information Display Control Head -J685-, replacing
-- Start the selected program and follow the instructions on the Vehicle Diagnostic Tester display.