Control Module/Amplifier For Digital Sound System, Removing And Installing, MIB 3: Removing

WARNING: This page is about a different car, the 2024 Audi Q3 and 2023 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.

-- Raise the front seat into its highest position and then move it all the way back.

-- Turn off the ignition and all electrical equipment. Set the ignition key outside of the vehicle.

-- Remove the floor mat.

-- Remove the expanding rivets -2- and then the cover -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connector -3-.

Courtesy of AUDI OF AMERICA, LLC

-- Release the retainers -arrows-.

-- Remove the Digital Sound System Control Module -J525- -2-.