2. Selector Mechanism Functionality Test

WARNING: This page is about a different car, the 2022 Audi S3, 2022 Audi RS 3, 2022 Audi A3 Quattro, and 2022 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Test step 2.1

Engine running, "D" position selected, and vehicle speed greater than 4 km/h (2.5 mph).

-- Engage the "N" position.

"N" position is engaged.

-- Engage the "R" position. "R" position is not possible.

"N" position is engaged.

-- Then engage the "D" position without applying the brakes; vehicle speed is greater than 4 km/h (2.5 mph).

It must be possible.

Test step 2.2

Engine running, "D", "R" or "N" position is selected, vehicle speed = 0 km/h (0 mph).

-- Select the drive position "P" :

"P" position must be displayed on the Selector Lever Transmission Range Display -Y5-.