Overview - Data Bus On Board Diagnostic Interface

Fig 1: DATA BUS On Board Diagnostic Interface

Courtesy of AUDI

1. Data Bus On Board Diagnostic Interface -J533- - Low
   • Removing and installing. Refer to Data Bus on Board Diagnostic Interface -J533-, REMOVING AND INSTALLING, LOW VERSION .
2. Mount
   • for Data Bus On Board Diagnostic Interface -J533- - Low
3. Mount
   • for Data Bus On Board Diagnostic Interface -J533- - High
4. Data Bus On Board Diagnostic Interface -J533- - High
   • Removing and installing. Refer to Data Bus on Board Diagnostic Interface -J533-, REMOVING AND INSTALLING, HIGH VERSION .
   • Market-specific version: bolt for data bus on board diagnostic interface on mount
   • 6 Nm
   • with Telematics Emergency Battery
   • Emergency Battery, Removing and Installing. Refer to CONNECTED GATEWAY, REPLACING EMERGENCY BATTERY .
5. Fiber Optic Cable Connector
   • Quantity: 2
   • Seal with Fiber-Optic Repair Set - Connector Protective Caps:VAS 6223/9 
6. Antenna Wire Connector
7. Connector
   • for Data Bus On Board Diagnostic Interface -J533- - High
8. Connector
   • for Data Bus On Board Diagnostic Interface -J533- - High
9. Connector
   • for Data Bus On Board Diagnostic Interface -J533- - Low