Night Vision System Control Module -J853-, REMOVING AND INSTALLING: Removing
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2022 Audi SQ8, 2022 Audi RS Q8, 2022 Audi Q8, 2021 Audi SQ8, and 2021 Audi RS Q8. However, it is still accessible from the selected car via links, so may be relevant.
-- Turn off the ignition and all electrical equipment. Set the ignition key outside of the vehicle.
-- Lay the carpet at the left front of the center console. Refer to CARPET, REMOVING AND INSTALLING .
-- Remove the screws in direction of -arrows-.
-- Disengage the Night Vision System Control Module -J853- -1- with the bracket -2- in the direction of -arrow A- and remove it.
-- Release and disconnect the connectors -3-.
-- Remove the screws -3-.
-- Remove the Night Vision System Control Module -J853- -1- from the bracket -2-.