Front Peripheral Camera -R243-, REMOVING AND INSTALLING: Removing
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2022 Audi S6, 2022 Audi A6 Quattro, 2021 Audi S6, 2021 Audi A6 Quattro, and 2020 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.
-- Turn off the ignition and all electrical equipment. Set the ignition key outside of the vehicle.
-- Remove the front bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .
-- Remove the center end panel. Refer to OVERVIEW - RADIATOR GRILLE .
-- Release and disconnect the connector from the Front Peripheral Camera -R243- -1-.
-- Remove the bolts -4-.
-- Remove the retaining plate -5-.
-- Remove the Front Peripheral Camera -R243- -1-.
-- If necessary, release the retaining tabs on the trim -2- and unclip the trim -2- forward from the radiator grille.
-- If necessary, remove the screws -3- and remove the holder -6- from the radiator grille.